Ngwuputa Coal seramiiki perforated lining Plate Weldable Tile

Igwe Ngwuputa Coal Seramiiki Perforated Lining Plate Weldable Tile Featrated Image
  • Ngwuputa Coal seramiiki perforated lining Plate Weldable Tile

Nkọwa dị mkpirikpi:

YIHO na-enye ma wụnye ọtụtụ ụdị Alumina Wear Resistant Tiles maka mkpuchi mkpuchi nke mpaghara niile dị ka Chutes, Silos, Feeders, Bins, Launders, Dutching, Tanks, Bunkers, Hoppers, Underpans wdg.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ihe mmeghe nke tile nke seramiiki weldable

YIHO na-enye ma wụnye ọtụtụ ụdị Alumina Wear Resistant Tiles maka mkpuchi mkpuchi nke mpaghara niile dị ka Chutes, Silos, Feeders, Bins, Launders, Dutching, Tanks, Bunkers, Hoppers, Underpans wdg.

Akọwapụtara dị ka ihe nke ọdịnihu, alumina ceramics bụ otu n'ime ihe ndị siri ike nke ihe okike niile mara mmadụ.N'okpuru ọnọdụ abrasive dị oke egwu, ọ nweghị ihe nwere ike ịsọ mpi na ọnụ ahịa ndụ yana ike siri ike yana eyi nguzogide.Na mgbakwunye, seramiiki alumina nwere kemịkalụ pụrụ iche, igwe, ọkụ na ihe mkpuchi ọkụ, enwere ike imepụta ya ka ọ bụrụ ọdịdị ma ọ bụ nha ọ bụla nwere àgwà dị iche iche maka ngwa akọwapụtara.

Weld-On alumina seramiiki taịlị ka a na-ejikarị na ngwa okpomọkụ dị elu ma dị n'ọtụtụ nha iji kwado ngwa gị na ndabere ngwaahịa mbụ.

Ihe nrụaka nka na ụzụ tile nwere ike weda seramiiki

Otu

HC92

HC95

HCT95

HC99

HC-ZTA

ZrO2

Al2O3

≥92%

≥95%

≥ 95%

≥ 99%

≥75%

/

ZrO2

/

/

/

/

≥21%

≥95%

Njupụta

(g/cm3  )

＞3.60

＞3.65g

＞3.70

＞3.83

＞4.10

＞5.90

HV 20

≥950

≥1000

≥1100

≥1200

≥1350

≥1100

Nkume Hardness HRA

≥82

≥85

≥88

≥90

≥90

≥88

Ehulata Ike MPa

≥220

≥250

≥300

≥330

≥400

≥800

Ike mkpakọ MPa

≥1050

≥1300

≥1600

≥1800

≥2000

/

Ike mgbajiji (KIc MPam 1/2)

≥3.7

≥3.8

≥4.0

≥4.2

≥4.5

≥7.0

Yiri olu (cm3)

≤0.25

≤0.20

≤0.15

≤0.10

≤0.05

≤0.02

Uru tile nwere ike ịgbara seramiiki

Alumina weldable tile, nke a makwaara dị ka alumina seramiiki weld-on tiles ma ọ bụ seramiiki weldable lining, na-enye ọtụtụ uru mgbe ejiri ya na ngwa na-eguzogide.A na-ejikarị taịlị ndị a na-echebe akụrụngwa ụlọ ọrụ na elu site na abrasion, mmetụta, na eyi.Nke a bụ ụfọdụ uru dị mkpa nke taịlị alumina weldable:

1. Elu ike na iyi Nguzogide: Alumina seramiiki bụ otu n'ime ihe ndị siri ike, na-enye nkwụsi ike na ike dị mma.Taịlị weldable mere nke alumina dị mma maka ichebe akụrụngwa na elu ekpughere ihe ndị na-emebi emebi.

2. Chemical na corrosion Resistance: Alumina bụ kemịkalụ inert na nke ukwuu na-eguzogide ọgwụ na-emebi emebi, na-eme ka ọ dị mma maka iji ya mee ihe na ụlọ ọrụ ndị nwere gburugburu kemịkalụ ike.

3. Mgbochi okpomọkụ: Alumina weldable tiles nwere ike iguzogide okpomọkụ dị elu na-enweghị mmebi dị ukwuu na ihe onwunwe ha, na-eme ka ha dị mma maka ngwa ndị metụtara okpomọkụ dị elu ma ọ bụ ujo ọkụ.

4. Uniform Surface: Taịlị ndị ahụ na-enye elu dị larịị na nke edoghị anya, na-ebelata nrụpụta ihe na-eme ka ihe na-aga n'ihu na-aga n'ihu, nke dị oke mkpa maka ụfọdụ usoro mmepụta ihe.

5. Mfe nke ntinye: Dị ka aha ahụ na-egosi, a na-emepụta taịlị weldable maka ntinye dị mfe site na iji usoro ịgbado ọkụ.Nke a na-enye ohere maka ntinye ngwa ngwa na nchekwa na mkpụrụ, na-ebelata oge nkwụsị n'oge ntinye na nhazi.

6. Ụdị nhazi na nha nha: Alumina weldable tiles nwere ike ịmepụta n'ụdị dị iche iche na nha dị iche iche iji kwado ngwá ọrụ ma ọ bụ ihe dị iche iche, na-enye mgbanwe na imewe ma hụ na mkpuchi zuru oke nke ebe ndị na-eyi uwe.

7. Mbelata mmezi nkwụsịtụ: Site n'ichebe ihe ndị dị n'okpuru na-eyi na mmebi, alumina weldable tiles na-agbatị ndụ ọrụ nke ngwá ọrụ ahụ, na-ebelata oge nhazi na nkwụsịtụ.

8. Dị ọnụ ahịa: Ọ bụ ezie na alumina weldable tiles nwere ike inwe ọnụ ahịa mbụ dị elu ma e jiri ya tụnyere ihe ụfọdụ, ogologo ndụ ha na-adị ogologo ma belata mkpa nlekọta na-eme ka ha dị irè n'ikpeazụ.

9. Igwe ọkụ eletrik: Alumina bụ ihe mkpuchi ọkụ eletrik dị mma, na-eme ka ọ dị mma maka ngwa ebe ọ dị mkpa ka a zere conductivity eletrik.

10. Nkwekọrịta na ihe dị iche iche: Alumina weldable tiles nwere ike iji mee ihe dị iche iche, gụnyere ígwè, ihe, na ihe ndị ọzọ, na-eme ka ha dị iche iche maka ọtụtụ ngwa ọrụ mmepụta ihe.

N'ozuzu, taịlị alumina weldable na-enye ihe ngwọta a pụrụ ịdabere na ya na nke dị irè maka ngwa na-eguzogide iyi, na-enye nchebe megide abrasion, mmetụta, na mwakpo kemịkalụ.Ịdị ogologo ha, ịdị mfe nke nrụnye, na ọnụ ahịa dị ogologo oge na-eme ka ha bụrụ nhọrọ a ma ama na ụlọ ọrụ dị ka Ngwuputa, ciment, ígwè, ike ọkụ, na njikwa ihe, ebe iyi na ịkwa akwa bụ ihe ịma aka.

Alumina weld-na Taịlị nkọwapụta

Onyonyo Nha isi emetụtara (mm)
23 100*100*10/12/20/25/30/50 150*100*10/12/14/15/20/23.5/24/25/30/40/50/70
150*50*12/10/20/25 100*100*10/12/20/25/30/50 120*80*10/12/20
120*80*15 45*45*11 50*50*17
70*70*20 75*75*50 80*40*30
105*55*25 90*90*60 145*145*20
200*200*60    
Enwere ike ịhazi oke ma nwee ike ịhazi nha.
  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa